Einer der Parameter des Befehls Netsh interface ip set dnsist register. Was ist ihr Zweck? Ich verstehe die Erklärungen in der Hilfe nicht. Welcher Wert wird auf diesen Parameter gesetzt, wenn ich die DNS-Konfiguration eines Netzwerkadapters über die Windows-Benutzeroberfläche eingestellt habe?
Befehlshilfe:
C:\Users\User>netsh int ipv4 set dns help Usage: set dnsservers [name=]<string> [source=]dhcp|static [[address=]<IP address>|none] [[register=]none|primary|both] [[validate=]yes|no] Parameters: Tag Value name - The name or index of the interface. source - One of the following values: dhcp: Sets DHCP as the source for configuring DNS servers for the specific interface. static: Sets the source for configuring DNS servers to local static configuration. address - One of the following values: <IP address>: An IP address for a DNS server. none: Clears the list of DNS servers. register - One of the following values: none: Disables Dynamic DNS registration. primary: Register under the primary DNS suffix only. both: Register under both the primary DNS suffix, as well as under the connection-specific suffix. validate - Specifies whether validation of the DNS server setting will be performed. The value is yes by default. Remarks: Sets DNS server configuration to either DHCP or static mode. Only when source is 'static', is the 'addr' option also available for configuring a static list of DNS server IP addresses for the specified interface. If Validate switch is yes, then the newly set DNS server is validated. Examples: set dnsservers name="Wired Ethernet Connection" source=dhcp set dnsservers "Wired Ethernet Connection" static 10.0.0.1 primary Er passt die DNS-Werte in den IPV4-Eigenschaften für die angegebene Schnittstelle an.
netsh interface ipv4 set dnsserver "Ethernet" static address=192.168.1.1 register=primary Legt dies fest, wenn in Systemsteuerung \ Alle Elemente der Systemsteuerung \ Netzwerkverbindungen angezeigt wird: 
Weitere Beispiele finden Sie unter https://superuser.com/a/204059/576067 .