Booten des Linux-Kernels über bootftp

Ich habe ein P2020RDB-Board mit einer U-Boot 2013.01-00115benutzerdefinierten eingebetteten Linux-Distribution installiert und alles funktioniert jetzt einwandfrei . Für einige Testzwecke brauche ich jedoch eine elegante Möglichkeit, verschiedene Images beim Booten zu wechseln. Da U-Bootdie Bildauswahl nicht unterstützt wird LILO(zumindest habe ich keine Möglichkeit gefunden, eine solche Aufgabe zu implementieren), habe ich den TFTPD-HPA- Server auf meinem Debian-Entwicklungscomputer eingerichtet und alle Kernel in das /srv/tftpVerzeichnis kopiert :

testuser@debianvirtual:/srv/tftp$ ls total 8656 4 drwxrwxrwx 2 nobody root 4096 Mar 8 09:36 ./ 4 drwxr-xr-x 3 root root 4096 Mar 8 09:21 ../ 4304 -rw-r--r-- 1 testuser testuser 4406711 Mar 3 10:46 uImage_spe_on_emulation_off 16 -rw-r--r-- 1 testuser testuser 13899 Mar 3 10:45 uImage_spe_on_emulation_off.dtb 4312 -rw-r--r-- 1 testuser testuser 4411448 Mar 3 10:07 uImage_spe_on_emulation_unimplemented 16 -rw-r--r-- 1 testuser testuser 13899 Mar 3 10:08 uImage_spe_on_emulation_unimplemented.dtb 

Der Server funktioniert und die Ethernet-Einstellungen auf beiden Seiten (Workstation und Board) scheinen in Ordnung zu sein, da ich das Image von der seriellen Konsole herunterladen kann:

=> tftpboot uImage_spe_on_emulation_unimplemented Speed: 1000, full duplex Using eTSEC1 device TFTP from server 192.168.35.213; our IP address is 192.168.35.106 Filename 'uImage_spe_on_emulation_unimplemented'. Load address: 0x1000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ######################################### 2.6 MiB/s done Bytes transferred = 4411448 (435038 hex) 

Wie starte ich nun einen Bootvorgang mit einem ausgewählten, dh heruntergeladenen Image? Wenn ich es versuche:

=> bootp 0x01000000 192.168.35.231:uImage_spe_on_emulation_unimplemented 

Ich bekomme:

Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5  Retry count exceeded; starting again eTSEC2 Waiting for PHY auto negotiation to complete......... TIMEOUT ! eTSEC2: No link. eTSEC3 Waiting for PHY auto negotiation to complete......... TIMEOUT ! eTSEC3: No link. Speed: 1000, full duplex 

Wie starte ich den Startvorgang mit dem heruntergeladenen Image ordnungsgemäß?

Addendum 1: Ich habe den Hinweis von Benutzer @sawdust ausprobiert:

=> bootm 1000000 

und ich bekomme:

WARNING: adjusting available memory to 30000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux-3.12.37-rt51+g43cecda Created: 2017-03-03 8:26:06 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 4411384 Bytes = 4.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK 

Dies ist in Ordnung, das Erstellungsdatum ist jedoch in Ordnung, nachdem der Boot-Prozess des oberen Meldungsblocks angehalten wurde.

ADDENDUM 2 : Ausgabe des printenvBefehls:

=> printenv $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp baudrate=115200 bdev=sda1 bootargs=root=/dev/mmcblk0p2 rw rootfstype=ext2 rootdelay=3 console=ttyS0,115200 bootcmd=mmcinfo; ext2load mmc 0:1 0x1000000 /boot/uImage; ext2load mmc 0:1 0xc00000 /boot/dtb_file; bootm 0x1000000 - c00000 bootdelay=10 bootfile=uImage console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp consoledev=ttyS0 eth1addr=00:04:9F:04:9E:7B eth2addr=00:04:9F:04:9E:7C ethact=eTSEC1 ethaddr=00:04:9F:04:9E:7A fdtaddr=c00000 fileaddr=1000000 filesize=435038 gatewayip=192.168.35.1 hostname=testhostname hwconfig=usb1:dr_mode=host,phy_type=ulpi ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off ipaddr=192.168.35.106 ipaddr=192.168.35.143 jffs2nand=mtdblock9 jffs2nor=mtdblock3 loadaddr=1000000 map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1 map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1 nandboot=i2c dev 1; i2c mw 18 1 0xe8 1; i2c mw 18 3 0x03 1; reset nandbootaddr=100000 nandfdtaddr=80000 netdev=eth0 nfsboot=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath norboot=i2c dev 1; i2c mw 18 1 0xc8 1; i2c mw 18 3 0x03 1; reset norbootaddr=ef080000 norfdtaddr=ef040000 pciboot=i2c dev 1; i2c mw 18 1 0xa8 1; i2c mw 18 3 0x03 1; reset ramboot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate ramdisk_size=120000 ramdiskaddr=2000000 ramdiskfile=rootfs.ext2.gz.uboot root=/dev/mmcblk0p2 rootpath=/opt/nfsroot sataboot=setenv bootargs root=/dev/sda3 rw console=$consoledev,$baudrate sdboot=i2c dev 1; i2c mw 18 1 0x68 1; i2c mw 18 3 0x03 1; reset serverip=192.168.35.213 spiboot=i2c dev 1; i2c mw 18 1 0x28 1; i2c mw 18 3 0x03 1; reset stderr=serial stdin=serial stdout=serial tftpflash=tftpboot $loadaddr $uboot; protect off 0xeff80000 +$filesize; erase uboot=u-boot.bin vscfw_addr=ef000000  Environment size: 1976/8188 bytes => 

und normale Startsequenzausgabe:

U-Boot 2013.01-00115-g831b30d (Jun 14 2013 - 21:48:56)  CPU0: P2020E, Version: 2.1, (0x80ea0021) Core: E500, Version: 5.1, (0x80211051) Clock Configuration: CPU0:1200 MHz, CPU1:1200 MHz, CCB:600 MHz, DDR:400 MHz (800 MT/s data rate) (Asynchronous), LBC:37.500 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: P2020RDB-PCA CPLD: V4.2 PCBA: V4.0 rom_loc: nor upper bank SD/MMC : 4-bit Mode eSPI : Enabled I2C: ready SPI: ready DRAM: Detected UDIMM 1 GiB (DDR3, 64-bit, CL=6, ECC off) Flash: 16 MiB L2: 512 KB enabled NAND: 128 MiB MMC: FSL_SDHC: 0 PCIe1: Root Complex of mini PCIe SLOT, no link, regs @ 0xffe0a000 PCIe1: Bus 00 - 00 PCIe2: Root Complex of PCIe SLOT, x1, regs @ 0xffe09000 02:00.0 - 1095:3132 - Mass storage controller PCIe2: Bus 01 - 02 In: serial Out: serial Err: serial Net: eTSEC2 is in sgmii mode. uploading VSC7385 microcode from ef000000 PHY reset timed out eTSEC1, eTSEC2, eTSEC3 Hit any key to stop autoboot: 0 Device: FSL_SDHC Manufacturer ID: 27 OEM: 5048 Name: SD8GB Tran Speed: 50000000 Rd Block Len: 512 SD version 2.0 High Capacity: Yes Capacity: 7.4 GiB Bus Width: 4-bit 4447010 bytes read in 256 ms (16.6 MiB/s) 13899 bytes read in 80 ms (168.9 KiB/s) WARNING: adjusting available memory to 30000000 ## Booting kernel from Legacy Image at 01000000 ... Image Name: Linux-3.12.37-rt51+g43cecda Created: 2017-02-22 8:19:07 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 4446946 Bytes = 4.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00c00000 Booting using the fdt blob at 0x00c00000 Uncompressing Kernel Image ... OK Loading Device Tree to 03ff9000, end 03fff64a ... OK WARNING: could not find compatible node fsl-usb2-dr: FDT_ERR_NOTFOUND. Using P2020RDB-PC machine description Memory CAM mapping: 256/256/256 Mb, residual: 256Mb Linux version 3.12.37-rt51+g43cecda (markofr@debianvirtual) (gcc version 4.9.2 (GCC) ) #7 SMP PREEMPT RT Wed Feb 22 09:18:46 CET 2017 CPU maps initialized for 1 thread per core setup_arch: bootmem mpc85xx_rdb_setup_arch() arch: exit bootconsole [udbg0] enabled mpc85xx_qe_init: Could not find Quicc Engine node MPC85xx RDB board from Freescale Semiconductor Zone ranges: DMA [mem 0x00000000-0x2fffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x00000000-0x2fffffff] MMU: Allocated 1088 bytes of context maps for 255 contexts PERCPU: Embedded 8 pages/cpu @c0eed000 s8640 r8192 d15936 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195072 Kernel command line: root=/dev/mmcblk0p2 rw rootfstype=ext2 rootdelay=3 console=ttyS0,115200 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 8, 1572864 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sorting __ex_table... Memory: 703196K/786432K available (6408K kernel code, 340K rwdata, 1852K rodata, 240K init, 228K bss, 83236K reserved) Kernel virtual memory layout: * 0xfffdf000..0xfffff000 : fixmap * 0xfdffc000..0xfe000000 : early ioremap * 0xf1000000..0xfdffc000 : vmalloc & ioremap SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. NR_IRQS:512 nr_irqs:512 16 mpic: Setting up MPIC " OpenPIC " version 1.2 at ffe40000, max 2 CPUs mpic: ISU size: 256, shift: 8, mask: ff mpic: Initializing for 256 sources mpc85xx_rdb_pic_init: Could not find qe-ic node clocksource: timebase mult[d555555] shift[24] registered Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized NET: Registered protocol family 16  Found FSL PCI host bridge at 0x00000000ffe09000. Firmware bus number: 0->1 PCI host bridge /pcie@ffe09000 (primary) ranges: MEM 0x00000000a0000000..0x00000000bfffffff -> 0x00000000a0000000 IO 0x00000000ffc10000..0x00000000ffc1ffff -> 0x0000000000000000 /pcie@ffe09000: PCICSRBAR @ 0xfff00000 /pcie@ffe09000: Setting PCI inbound window greater than memory size Found FSL PCI host bridge at 0x00000000ffe0a000. Firmware bus number: 0->0 PCI host bridge /pcie@ffe0a000 ranges: MEM 0x0000000080000000..0x000000009fffffff -> 0x0000000080000000 IO 0x00000000ffc00000..0x00000000ffc0ffff -> 0x0000000000000000 /pcie@ffe0a000: PCICSRBAR @ 0xfff00000 /pcie@ffe0a000: Setting PCI inbound window greater than memory size PCI: Probing PCI hardware fsl-pci ffe09000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xbfffffff] pci_bus 0000:00: root bus resource [bus 00-ff] pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01) pci 0000:00:00.0: PCI bridge to [bus 01-ff] fsl-pci ffe0a000.pcie: PCI host bridge to bus 0001:02 pci_bus 0001:02: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff]) pci_bus 0001:02: root bus resource [mem 0x80000000-0x9fffffff] pci_bus 0001:02: root bus resource [bus 02-ff] pci 0001:02:00.0: ignoring class 0x0b2000 (doesn't match header type 01) pci 0001:02:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring pci 0001:02:00.0: PCI bridge to [bus 03-ff] pci 0000:00:00.0: BAR 9: can't assign mem pref (size 0x100000) pci 0000:01:00.0: BAR 6: assigned [mem 0xa0080000-0xa00fffff pref] pci 0000:00:00.0: PCI bridge to [bus 01] pci 0000:00:00.0: bridge window [io 0x0000-0xffff] pci 0000:00:00.0: bridge window [mem 0xa0000000-0xbfffffff] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc pci 0001:02:00.0: PCI bridge to [bus 03] pci 0001:02:00.0: bridge window [io 0x20000-0x2ffff] pci 0001:02:00.0: bridge window [mem 0x80000000-0x9fffffff] mpic-msgr ffe41400.message: Found 0 message registers mpic-msgr ffe41400.message: Of-device full name /soc@ffe00000/message@41400 mpic-msgr ffe41400.message: Failed to find message register block alias fsl-l2ctlr ffe20000.l2-cache-controller: Entire L2 as cache, provide valid sram address and size fsl-l2ctlr: probe of ffe20000.l2-cache-controller failed with error -22 bio: create slab <bio-0> at 0 Freescale Elo series DMA driver fsl-elo-dma ffe0c300.dma: #0 (fsl,eloplus-dma-channel), irq 76 fsl-elo-dma ffe0c300.dma: #1 (fsl,eloplus-dma-channel), irq 77 fsl-elo-dma ffe0c300.dma: #2 (fsl,eloplus-dma-channel), irq 78 fsl-elo-dma ffe0c300.dma: #3 (fsl,eloplus-dma-channel), irq 79 fsl-elo-dma ffe21300.dma: #0 (fsl,eloplus-dma-channel), irq 20 fsl-elo-dma ffe21300.dma: #1 (fsl,eloplus-dma-channel), irq 21 fsl-elo-dma ffe21300.dma: #2 (fsl,eloplus-dma-channel), irq 22 fsl-elo-dma ffe21300.dma: #3 (fsl,eloplus-dma-channel), irq 23 qe_init: Could not find Quicc Engine node SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Switched to clocksource timebase NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 6, 262144 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 3, 40960 bytes) UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Freescale PMC driver audit: initializing netlink socket (disabled) type=2000 audit(0.597:1): initialized HugeTLB registered 1 MB page size, pre-allocated 0 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages HugeTLB registered 16 MB page size, pre-allocated 0 pages HugeTLB registered 64 MB page size, pre-allocated 0 pages HugeTLB registered 256 MB page size, pre-allocated 0 pages HugeTLB registered 1 GB page size, pre-allocated 0 pages NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.30 [Flags: R/O]. jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. msgmni has been set to 1502 io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0xffe04500 (irq = 42, base_baud = 37500000) is a 16550A console [ttyS0] enabled, bootconsole disabled console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0xffe04600 (irq = 42, base_baud = 37500000) is a 16550A Generic non-volatile memory driver v1.1 brd: module loaded loop: module loaded nbd: registered device at major 43 st: Version 20101219, fixed bufsize 32768, s/g segs 256 pci 0000:00:00.0: enabling device (0106 -> 0107) scsi0 : sata_sil24 scsi1 : sata_sil24 ata1: SATA max UDMA/100 host m128@0xa0000000 port 0xa0004000 irq 24 ata2: SATA max UDMA/100 host m128@0xa0000000 port 0xa0006000 irq 24 ef000000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101 Amd/Fujitsu Extended Query Table at 0x0040 Amd/Fujitsu Extended Query version 1.5. number of CFI chips: 1 5 ofpart partitions found on MTD device ef000000.nor Creating 5 MTD partitions on "ef000000.nor": 0x000000000000-0x000000040000 : "NOR Vitesse-7385 Firmware" ftl_cs: FTL header not found. 0x000000040000-0x000000080000 : "NOR DTB Image" ftl_cs: FTL header not found. 0x000000080000-0x000000500000 : "NOR Linux Kernel Image" ftl_cs: FTL header not found. 0x000000500000-0x000000ec0000 : "NOR JFFS2 Root File System" ftl_cs: FTL header not found. 0x000000ec0000-0x000001000000 : "NOR U-Boot Image" ftl_cs: FTL header not found. ONFI param page 0 valid ONFI flash detected NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64 Bad block table found at page 65472, version 0x01 Bad block table found at page 65408, version 0x01 6 ofpart partitions found on MTD device ff800000.flash Creating 6 MTD partitions on "ff800000.flash": 0x000000000000-0x000000100000 : "NAND U-Boot Image" ftl_cs: FTL header not found. 0x000000100000-0x000000200000 : "NAND DTB Image" ftl_cs: FTL header not found. 0x000000200000-0x000000600000 : "NAND Linux Kernel Image" ftl_cs: FTL header not found. 0x000000600000-0x000000a00000 : "NAND Compressed RFS Image" ftl_cs: FTL header not found. 0x000000a00000-0x000001100000 : "NAND JFFS2 Root File System" ftl_cs: FTL header not found. 0x000001100000-0x000002000000 : "NAND Writable User area" ftl_cs: FTL header not found. eLBC NAND device at 0xff800000, bank 1 fsl_espi ffe07000.spi: master is unqueued, this is deprecated m25p80 spi32766.0: found s25fl128s, expected m25p80 m25p80 spi32766.0: s25fl128s (16384 Kbytes) 5 ofpart partitions found on MTD device spi32766.0 Creating 5 MTD partitions on "spi32766.0": 0x000000000000-0x000000100000 : "SPI U-Boot Image" ftl_cs: FTL header not found. 0x000000100000-0x000000180000 : "SPI DTB Image" ftl_cs: FTL header not found. 0x000000180000-0x000000580000 : "SPI Linux Kernel Image" ftl_cs: FTL header not found. 0x000000580000-0x000000980000 : "SPI Compressed RFS Image" ftl_cs: FTL header not found. 0x000000980000-0x000001000000 : "SPI JFFS2 RFS" ftl_cs: FTL header not found. fsl_espi ffe07000.spi: at 0xf10f0000 (irq = 59) libphy: Fixed MDIO Bus: probed libphy: Freescale PowerQUICC MII Bus: probed libphy: Freescale PowerQUICC MII Bus: probed fsl-gianfar ffe24000.ethernet: enabled errata workarounds, flags: 0x4 fsl-gianfar ffe24000.ethernet eth0: mac: 00:04:9f:04:9e:7a fsl-gianfar ffe24000.ethernet eth0: Running with NAPI enabled fsl-gianfar ffe24000.ethernet eth0: RX BD ring size for Q[0]: 256 fsl-gianfar ffe24000.ethernet eth0: TX BD ring size for Q[0]: 256 fsl-gianfar ffe25000.ethernet: enabled errata workarounds, flags: 0x4 fsl-gianfar ffe25000.ethernet eth1: mac: 00:04:9f:04:9e:7b fsl-gianfar ffe25000.ethernet eth1: Running with NAPI enabled fsl-gianfar ffe25000.ethernet eth1: RX BD ring size for Q[0]: 256 fsl-gianfar ffe25000.ethernet eth1: TX BD ring size for Q[0]: 256 fsl-gianfar ffe26000.ethernet: enabled errata workarounds, flags: 0x4 fsl-gianfar ffe26000.ethernet eth2: mac: 00:04:9f:04:9e:7c fsl-gianfar ffe26000.ethernet eth2: Running with NAPI enabled fsl-gianfar ffe26000.ethernet eth2: RX BD ring size for Q[0]: 256 fsl-gianfar ffe26000.ethernet eth2: TX BD ring size for Q[0]: 256 pps pps0: new PPS source ptp0 ucc_geth_driver: QE UCC Gigabit Ethernet Controller e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2013 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 fsl-ehci fsl-ehci.0: irq 28, io mem 0xffe22000 fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Freescale On-Chip EHCI Host Controller usb usb1: Manufacturer: Linux 3.12.37-rt51+g43cecda ehci_hcd usb usb1: SerialNumber: fsl-ehci.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbcore: registered new interface driver usb-storage i2c /dev entries driver mpc-i2c ffe03000.i2c: timeout 1000000 us mpc-i2c ffe03100.i2c: timeout 1000000 us sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper /soc@ffe00000/sdhc@2e000: voltage-ranges unspecified mmc0: Internal clock never stabilised. mmc0: Internal clock never stabilised. mmc0: SDHCI controller on ffe2e000.sdhc [ffe2e000.sdhc] using DMA talitos ffe30000.crypto: hwrng talitos ffe30000.crypto: max_xor_srcs 6 talitos ffe30000.crypto: fsl,sec3.1 algorithms registered in /proc/crypto mmc0: Internal clock never stabilised. usbcore: registered new interface driver usbhid usbhid: USB HID core driver ipip: IPv4 over IPv4 tunneling driver TCP: cubic registered Initializing XFRM netlink socket mmc0: Internal clock never stabilised. NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Key type dns_resolver registered /home/markofr/QorIQ-SDK-V1.9-20151210-yocto/build_barebone/tmp/work-shared/p2020rdb/kernel-source/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Waiting 3 sec before mounting root device... mmc0: Internal clock never stabilised. mmc0: Internal clock never stabilised. mmc0: Internal clock never stabilised. mmc0: Internal clock never stabilised. usb 1-1: new high-speed USB device number 2 using fsl-ehci mmc0: Internal clock never stabilised. mmc0: Internal clock never stabilised. mmc0: new high speed SDHC card at address 0007 mmcblk0: mmc0:0007 SD8GB 7.42 GiB mmcblk0: p1 p2 usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1: Product: USB2.0 Hub hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1.4: new high-speed USB device number 3 using fsl-ehci usb 1-1.4: New USB device found, idVendor=125f, idProduct=c93a usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.4: Product: A-DATA USB Flash Drive usb 1-1.4: Manufacturer: A-DATA usb 1-1.4: SerialNumber: f8a0f742b086a5 usb-storage 1-1.4:1.0: USB Mass Storage device detected scsi2 : usb-storage 1-1.4:1.0 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 0) ata1.00: ATA-7: FUJITSU MHV2120BH PL, 00840029, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2120B 0084 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 2:0:0:0: Direct-Access A-DATA USB Flash Drive 0.00 PQ: 0 ANSI: 2 sd 2:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: [sdb] 7892087 512-byte logical blocks: (4.04 GB/3.76 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Asking for cache data failed sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Asking for cache data failed sd 2:0:0:0: [sdb] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk sdb: sdb1 sd 2:0:0:0: [sdb] Asking for cache data failed sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Attached SCSI removable disk ata2: SATA link down (SStatus 0 SControl 0) EXT2-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended VFS: Mounted root (ext2 filesystem) on device 179:2. devtmpfs: mounted Freeing unused kernel memory: 240K (c0815000 - c0851000) INIT: version 2.88 booting Starting udev udevd[1489]: starting version 182 EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. hwclock: can't open '/dev/misc/rtc': No such file or directory Sat Mar 4 00:20:30 UTC 2017 INIT: Entering runlevel: 5misc/rtc': No such fil Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.23.1) started Sending discover... libphy: fixed-0:01 - Link is Up - 1000/Full IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 192.168.35.106... Lease of 192.168.35.106 obtained, lease time 600 /etc/udhcpc.d/50default: Adding DNS 192.168.35.1 /etc/udhcpc.d/50default: Adding DNS 84.255.209.79 /etc/udhcpc.d/50default: Adding DNS 84.255.210.79 done. Starting system message bus: dbus. Starting OpenBSD Secure Shell server: sshd done. Starting rpcbind daemon...done. starting statd: done /etc/rc5.d/S20cs: line 2: $'\r': command not found Starting Component Server ... Done. Starting Distributed Compiler Daemon: distcc. hwclock: can't open '/dev/misc/rtc': No such file or directory starting 8 nfsd kernel threads: NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period (net c088bb20) done starting mountd: done Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon  QorIQ SDK (FSL Reference Distro) 1.9 p2020rdb /dev/ttyS0  p2020rdb login: